Parts and Accessories for Etac Swift and Alto Shower Commodes

1 5/8" Thick with Rear Opening

Ergonomically shaped soft comfort seat with substantial cushioning and a contoured surface that provides pressure relief and support. Designed with a rear-opening and a front recess to improve access during hygiene routines. Height: 1.625 inches

Material: Polyurethane

For users who need a softer, more contoured seat to improve comfort, stability, and support during extended seated use.

3/4" Thick with Rear Opening

Soft comfort seat with rounded contours and moderate cushioning to enhance comfort without significantly increasing seat height. Includes a rear-opening and a front recess to improve access and usability during hygiene routines. Height: 0.75 inches.

Material: Polyurethane

For users who need added comfort with minimal height increase while maintaining stability and access.

1 5/8" Thick with Small Opening

Ergonomically shaped soft comfort seat with a smaller opening to improve positioning control and reduce the risk of sliding into the opening. Designed with a front recess to support access and hygiene. Height: 1.625 inches; Opening width: 5.875 inches

Material: Polyurethane

For smaller users or those who require increased positioning support and stability during longer seated periods.

1 5/8" Thick with Large Opening

Ergonomically shaped soft comfort seat with a larger opening to allow greater access while maintaining comfort and support. Designed with a front recess for improved usability during hygiene routines. Height: 1.625 inches; Opening width: 7.125 inches

Material: Polyurethane

For users who require increased access while maintaining cushioning and support during extended seated use.

3/4" Thick with Large Opening

Shaped soft comfort seat with a front recess that promotes access and distributes pressure across a larger surface area. Provides light cushioning without significantly increasing seat height. Height: 0.75 inches; Opening width: 7.125 inches

Material: Polyurethane

For users who want mild added comfort while maintaining a low seat height and improved pressure distribution.

3/4" Thick

Soft seat cover that creates a full sitting surface and discreetly covers the pan opening for commode use. Height: 0.75 inches

Material: Polyurethane

For users who need full-seat support when using the chair as a shower chair or bedside commode for extended periods. The removable pad covers the pan area for seating.

Soft Back Pad

Soft, heat-retaining back pad positioned inside the armrests, allowing the armrests to fold up for side transfers without obstruction. Provides warmth and pressure relief while maintaining full chair accessibility.

Material: Polyethylene

For users who get chilled easily and have trouble sitting upright for longer periods of time.  The side support aligns the patient’s back into the back support and gently prompts lateral support for longer sitting times.

Armrest Pads

Soft armrest padding that provides warmth and cushioning for the forearms while keeping the gripping surface clear to support safe sit-to-stand transfers. Sold in pairs.

Material: Polyethylene

For users who experience discomfort, bruising, or sensitivity in the forearms during prolonged use.

Armrest Hemiplegia

Contoured arm support designed to stabilize the forearm and prevent slipping. Can be mounted on either armrest and includes a heat-reflective outer surface.

Material: Polyethylene.

For users with hemiplegia or severe weakness on one side of the body that need a larger surface to keep their arm from slipping off the arm support.

Armrest Lock

Locking pin mechanism that secures armrests in either the folded-up or folded-down position to control movement and positioning.

Material: Stainless steel

For users that experience anxiety and attempt to reposition themselves or escape from chair.

Comfort Cover

Soft back with integrated armrest cushions.

The back pad is large and thick.  The arm pads are similar to Armrest Pads.  The back pad is connected to the arm pads.

Material: Polyurethane

For users that bruise easily in the back and arms. The comfort padding provides a soft support while the gripping surface on the armrest is kept free.

XL Back

Increases the width between the armrests to a total width of 48/54/60.

Only fits Swift Mobil-2, not compatible with tilt version. XL-back replaces the existing back frame.  It does not make the seat of the chair wider.

Material: Polyester, Powder coated steel, stainless steel. polypropylene

For larger users, offering more room for back
and shoulders.

For user that have a broad back or are sensitive to pressure (the tubes of the seat chassis) and would benefit from extra width.

Also for medium sized users who would need more lateral support since they can immerse into the mesh back.

Hip and Chest Cushioned Positioning Belt

Padded, quick-drying positioning belt providing secure yet gentle support at hips or chest.

If used as a chest belt, you must use a hip belt to reduce risk of slinging forward and strangulation.

Length: 25–51 inches.
Material: Polyester, Spandex, Polyamide

For users who slide forward or need gentle positioning support with sensitive skin considerations.

Hip Belt

Adjustable pelvic positioning belt that stabilizes and centers the user in the chair.

Material: Polyester

For users needing pelvic stability during hygiene routines and transfers.

Chest Belt

Provides front support to the trunk. Easy to adjust in length and is attached around the straps of the back support. Use together with a hip belt.

Material: Polyester

For users that need trunk support to help prevent forward flexion and improve sitting security.  
A hip belt is required to prevent sliding off the seat and minimize risk of getting strangled.

Headrest

Multi-adjustable headrest with shaped pillow. Adjustable in height, depth, sideways and in
angle. Complete with bracket.

Material: Pillow: Polyurethane. Brace: Stainless steel

Accommodates the head of users with all kinds of posture presentations since it can be adjusted in height, depth and sideways.

Side Support

Padded side support for improved positioning and a snug feeling when seated. Adjustable in width.

Material: Polyester fabric, hook and loop, polyethylene

For users that have trouble sitting upright for longer periods of time.  The side support aligns the patient’s back into the back support and promotes lateral support for longer sitting times.

Cross Bar, Standard

Forward support bar that attaches to armrests and provides a stable surface for gripping or leaning. Compatible with Swift Mobil-2, Swift Mobil Tilt-2, Swift Mobil 24"-2, and Alto models.

Length: 23.819 inches

Material: Aluminum, polyethylene

For users with limited trunk control who benefit from forward support and increased sense of security.

Cross Bar, XL

Extended-width forward support bar designed specifically for use with XL-back configurations. Compatible only with Swift Mobil-2 with XL-back.

Length: 26.181 inches.

Compatible with Swift Mobil-2 XL-back ONLY

Material: Aluminum, polyethylene

For users requiring additional width and support when using XL configurations

Short Footrests

Swing-away footrests with adjustable length to accommodate shorter leg lengths or compensate for increased seat height when using thicker comfort cushions.

Length: 9.5–14.375 inches.

Sold as a pair.

Material: stainless steel and polypropylene

For users with shorter legs or when seat height is increased due to thicker cushions.

Legrest with Flip-Up Footplates

Height-adjustable, swing-away legrests with foldable footplates that allow angle adjustment and improved positioning. Includes heel straps.

Sold as a pair.

Material: Stainless steel and polypropylene

Footplates can be adjusted to match the angle of the user’s feet, increasing comfort and support. They also flip up for easier standing transfers.  Flip-up design provides clear space for sit-to-stand transfers.  Good for users who need more foot support due to limited ankle mobility.

Legrest Widening Kit

Adapters for extra legroom. Increase the width between leg rests with 4.75 inches. Included in all XL/wide-back configurations.

Sold as a pair.

Material: Polyamide

To allow more space for easier personal hygiene tasks. Adds 4.725” more leg room and attaches to the leg support insert.  Ideal for users with larger thighs.

Leg and Calf Support

Leg rest with an adjustable angle that can be used for both left and right legs. Comes with 4 fixed-angle positions.

Sold per piece.

Material: Stainless steel and ABS-plastic

For users with a plaster or a leg orthosis, when knee flexion isn’t possible.

Amputee Legrest

Adjustable in height, length and angle. Can be used on both left and right sides. If the user is an amputee, we recommend using anti-tippers.

Material: Stainless steel and polyurethane

Provides comfortable support for users with an amputation.  Helps support the residual limb during sitting.

Heel Straps

Mounted on foot plates. Prevents the feet from sliding backwards. Adjustable in length.

Sold as a pair.

Material: Polyester

Keep the user’s feet on the footplates especially when the chair is in a tilted position.

Footrest for Leg and Calf Support

For use with Leg and Calf Support, this is not a standalone product.

Material: ABS plastic

Separate foot plate used with the elevating leg supports so the foot is supported while the leg is elevated.

Pan with Lid and Handle

Shaped to avoid spilling and simplify emptying/pouring. Lid locks automatically when lifted. Pan holder is ordered separately.

Material: Polypropylene

Lidded pan with locking handle to help prevent spills and splashing during toileting; improves hygiene and ease of carrying/emptying. 

Pan Only

Pan only for toileting use; pairs with the compatible lid and pan holder for splash reduction and easier handling. 

Pan Lid Only

Lid only (with handle) to pair with the Etac pan for spill control and more hygienic transport/emptying. 

Pan Holder

Fits Etac Pan.  Clicked into attachment holders under the seat which are included as standard. 

Enables toileting over a pan by securely holding the Etac pan under the seat (used with Clean’s integrated attachment holders). 

Bucket with Lid and Handle

Traditional bucket that is used with a bucket holder. Including lid. Bucket holder is ordered separately. 

Use with a bucket holder for a contained toileting option when a pan isn’t preferred; includes handle and lid for discreet carrying/emptying

Bucket Holder

Fits Bucket with handle and lid and other buckets with a thick rim/high edges. Clicked into attachment holders under the seat which are included as standard. 

Attachment for Low Mounting of Pan/Bucket Holder

Fitted to the pan/bucket holder. Lowers the pan/bucket holder 2½”. 

Attachment for Pan/Bucket Holder

To be mounted firmly under the seat enabling the use of pan holders. Fitted with a screwdriver. Complete set.

Material: Polyamide

Always needed to fit a pan/bucket holder.

Required if not included with original configuration.

Splash Guard

Provides a soft protection in the front to avoid splashing. Attaches to the front of the seat and can easily be removed. Can also be handheld for improved control. 

Material: Polyurethane 

Soft front protection to reduce urine splashing during toileting; removable and can also be handheld for added control. 

Pan Locker

Holds the pan in place when the shower chair is tilted. Compatible with Swift Mobil Tilt-2 variants.

Material: Polypropylene

Back Anti-Tippers for Swift Mobil Tilt-2

Provides protection against the chair tipping backwards. Increases safety when the center of gravity falls far to the back.

Material: Polypropylene and Aluminum

Back Anti-Tippers for Swift Mobil-2

Anti-tip Including attachment: Provides protection against the chair tipping backwards. Sold as a pair.

Material: Polypropylene and Aluminum

Tilter

Facilitates transfer over e.g. thresholds or ramps. Sold complete with bracket.

Material: Polypropylene and Aluminum

24" Rear Wheel Kit for Swift Mobil-2

24” rear wheels with solid tires and built-in tipping guards. Easy to mount. Includes attachment and brake. Fits Swift Mobil, not Swift Mobil Tilt.

Material: Polyamide, stainless steel, polyurethane aluminum

Upright Back for Swift Mobil-2

For an optimal fit over wall-mounted toilets. Allows the chair to be placed 2.75 inches closer to the wall compared to a standard back frame (does not fit Swift Mobil Tilt-2).

Material: Polyester, Powder coated steel, stainless steel, polypropylene