Parts and Accessories for Etac Clean Shower Commodes

3/4" Seat Cover, Grey

3/4" Seat Cover, Black

Soft seat cover that creates a full sitting surface and discreetly covers the pan opening for commode use. Height: 0.75 inches.

Material: Polyurethane

For users who need full-seat support when using the chair as a shower chair or bedside commode for extended periods. The removable pad covers the pan area for seating. 

3/4" Soft Pad with Rear Opening

Thin, heat-reflective seat with non-slip surface for light comfort without bulk. Height: 0.75 inches; Opening width: 6.75 inches.

Material: Polyurethane

For users who want mild comfort without increasing seat height. 

3/4" Thick with Rear Opening

Contoured comfort seat with front recess for access and improved positioning stability. Height: 0.75 inches; Opening width: 7 inches. 

Material: Polyurethane 

For users who need added comfort with minimal height increase and improved pelvic stability. 

1 1/2" Thick with Small Rear Opening

Contoured comfort seat with smaller opening to reduce slipping and improve positioning control. Height: 1.5 inches; Opening width: 6 inches. 

Material: Polyurethane 

For smaller users or those at risk of sliding into the opening. 

1 1/2" Thick with Large Rear Opening

Contoured comfort seat with added cushioning for pressure relief and stability. Height: 1.5 inches; Opening width: 7 inches. 

Material: Polyurethane

For users who sit longer and need increased cushioning and stability. 

3/4" Thick with Front Opening

Open-front comfort seat enabling easier personal hygiene access with added softness. Must be used with Etac Clean chair with front opening. 

Height: 0.75 inches. 

Material: Polyurethane 

For users performing independent hygiene routines requiring front access. 

Soft Back Pad

Heat-reflecting material with a non-slip surface back pad that adds warmth and reduces pressure against the backrest.

Material: Polyurethane

For users who get chilled easily or require gentler back contact due to sensitive skin.

Comfort Arm Pads

Soft forearm supports that improve comfort while allowing a gripping surface when standing/sitting.

Material: Polyurethane

For users prone to forearm discomfort, bruising, or cold sensitivity.

Comfort Cover

Integrated soft backrest with connected armrest pads that provide full upper-body warmth and cushioning. The back pad is larger and thicker than the Soft Back Pad, and the arm pads are similar to the Comfort Arm Pads. The back pad is connected to the arm pads as one system.

Material: Polyurethane

For users needing combined back and arm comfort with enhanced support, especially those with sensitive skin.

Comfort Kit

Complete comfort solution combining Comfort Cover and Soft Comfort Seat (1.5-inch height) for full-body cushioning and warmth.

Material: Polyurethane

For users requiring full upper-body and seating comfort, particularly those prone to bruising or discomfort.

Soft Back Support

Adjustable soft mesh backrest that conforms to the user’s spine for improved pressure distribution.

For users with sensitive backs or spinal curvature needing adaptive support.

Hip and Chest Cushioned Positioning Belt

Padded, quick-drying positioning belt providing secure yet gentle support. Can be used as a hip belt on all Clean models or as a chest belt when used with the Soft Back Support.   

If used as a chest belt, you must use a hip belt to reduce risk of slinging forward and strangulation.  

Length: 25–51 inches. 

Material: Polyester, Spandex, Polyamide 

For users who slide forward or need gentle positioning support with sensitive skin considerations. 

Hip Belt

Adjustable pelvic positioning belt that stabilizes and centers the user in the chair.

Material: Polyester

For users needing pelvic stability during hygiene routines and transfers.

Chest Belt

Adjustable trunk support belt compatible only with Soft Back Support. Must be used in combination with a hip belt for safe use.

Material: Polyester

For users that need trunk support to help prevent forward flexion and improve sitting security. 

Safety Strap

Rear-mounted safety strap compatible with the standard backrest. Intended for use only in combination with a positioning belt to enhance safety.

Material: Polyester

For users that require secondary safety strap for extra security. Should always be used together with positioning belt to prevent sliding off the seat and minimize risk of getting strangled.

Crossbar

Soft and heat reflecting material and provides a good grip.

Can be used to hold on to, lean forward against and to increase the user’s sense of safety. Easy to attach to the arm supports.

Material: Aluminum, cellular polyethylene, polypropylene.

For users with trunk stability issues the crossbar allows the user to lean forward safely and increases perceived security.

Side Support

Adjustable padded lateral supports that guide and maintains upright positioning.

Material: Polyester fabric, hook and loop, polyethylene.

For users who need gentle lateral prompting to stay aligned during seated use.

Front and Rear Casters

75 mm castors – Clean 49 cm only

Reduces seat height by 5 cm.

Mounted on Clean 44 cm as standard.

Material: polyamide, TPE, aluminium.

Flip-Up Foot Supports

Footrests that are foldable, height-adjustable and removable. Only compatible with Clean Height Adjustable. Sold in pairs.

Material: Powder coated aluminum and polypropylene foot supports

For users who need separate and removable, height‑adjustable foot support on the Clean Height Adjustable to improve lower‑limb comfort and positioning

Pan with Lid and Handle

Shaped to avoid spilling and simplify emptying/pouring. Lid locks automatically when lifted. Pan holder is ordered separately.

Material: Polypropylene

Lidded pan with locking handle to help prevent spills and splashing during toileting; improves hygiene and ease of carrying/emptying. 

Pan Only

Pan only for toileting use; pairs with the compatible lid and pan holder for splash reduction and easier handling. 

Pan Lid Only

Lid only (with handle) to pair with the Etac pan for spill control and more hygienic transport/emptying. 

Pan Holder

Fits Etac Pan.  Clicked into attachment holders under the seat which are included as standard. 

Enables toileting over a pan by securely holding the Etac pan under the seat (used with Clean’s integrated attachment holders). 

Bucket with Lid and Handle

Traditional bucket that is used with a bucket holder. Including lid. Bucket holder is ordered separately. 

Use with a bucket holder for a contained toileting option when a pan isn’t preferred; includes handle and lid for discreet carrying/emptying

Bucket Holder

Fits Bucket with handle and lid and other buckets with a thick rim/high edges. Clicked into attachment holders under the seat which are included as standard. 

Attachment for Low Mounting of Pan/Bucket Holder

Fitted to the pan/bucket holder. Lowers the pan/bucket holder 2½”. 

Splash Guard

Provides a soft protection in the front to avoid splashing. Attaches to the front of the seat and can easily be removed. Can also be handheld for improved control. 

Material: Polyurethane 

Soft front protection to reduce urine splashing during toileting; removable and can also be handheld for added control. 

Soap Dish

Soap dish with built-in holder for shower handle. Can also be used to hold pan lid or toilet paper. Easily clicked onto the side of the seat. 

Material: Polypropylene 

Provides extra storage for the user to promote independent care.   

Disposable Pans

Strong and firm disposable pans. 50 pcs. Pan holder kit is needed. 

Single‑use, strong disposable pans for hygienic toileting and reduced cleaning burden in multi‑user/care settings.